Jan 15, 2024 Leave a message

Five characteristics of industrial chiller and installation instructions

In the environmental protection category of products, industrial chiller is a, its use, similar to ordinary chiller, are used to achieve the purpose of ventilation and cooling. Below, through different aspects, we have a preliminary familiarity with and understanding of industrial chiller, in order to distinguish it from ordinary chiller.

 

Why industrial chillers are environmentally friendly products? This is because this type of chiller has no compressor and refrigerant, and will not cause pollution to the environment, so this type of chiller is divided into the environmental protection category. In principle, the ventilation and cooling of the room are carried out by convection ventilation, so as to achieve the desired temperature and humidity.

 

1. The main characteristics of industrial chiller

(1) can achieve green environmental protection, and almost will not pollute the ambient air. In addition, the cooling effect is very obvious, for different regions, there can be a suitable cooling range to carry out temperature stability.

(2) From the point of view of its operating costs and investment benefits, industrial chiller is also very good, can have a better investment recovery, as well as lower operating costs.

(3) In terms of cost, compared with traditional air conditioning systems, it can be effectively reduced, and some can be reduced by up to half.

(4) Industrial chillers are simple and convenient to operate, less maintenance work and easy to carry out. There is no need for dedicated maintenance personnel, and it is also able to handle some simple problems.

(5) During the operation of the industrial chiller, the noise and vibration are small, and the body itself will not dissipate heat around, which can avoid overheating.

 

2. Installation instructions for industrial chiller

Generally speaking, it is better for industrial chillers to be installed outdoors. If the ambient air quality is good, this is greatly beneficial to it. However, it cannot use the return air mode, because there may be problems. For the air duct, it should be avoided to be too long, and it is better to control it at 15 to 20 meters. In the use of elbow, to minimize, or even do not use.

 

Through the above two parts, we can clearly know what the characteristics of the industrial chiller are, and some of the necessary contents of the installation, so as to be applied to actual operation to improve its performance and effect. From another point of view, these are also necessary preconditions and preparations for in-depth discussion.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry