Now the enterprise factory workshop ventilation and cooling use of chiller customers, that is more and more, some new friends also want to install, but worry about the use of equipment, these concerns we are very understandable, after all, some customers may not understand, may just have heard of it, so say a hundred smell is not as good as a try, today to tell you about the advantages of chiller!
1. Remove excessive heat in the workshop in time;
2, timely removal of exhaust gas, odor;
3, timely removal of smoke and dust;
4, remove too much water in time to reduce the erosion of equipment;
5, increase the oxygen content of the workshop, improve work efficiency and productivity;
6, air circulation, reduce staff discomfort.

Since the chiller is cooled by water evaporation, when it encounters hot weather, it can be reduced by 4-10 degrees, if it is some very hot and dry weather, it can be reduced to about 15 degrees, when the air enters the industrial chiller from the wet curtain, the water above the wet curtain evaporates heat, forms cold air, and is sent to the workshop to cool down. Therefore, it changes with the temperature of the outside world, and the higher the temperature of the outside world, the better the cooling effect. Not only that, but also the industrial chiller is very power-saving, as long as 1 degree of electricity per hour can cool the area of 100-150 square meters, very environmental protection and energy saving, because there is no compressor, the direct use of physical cooling, so completely green and pollution-free.





