Jan 24, 2024 Leave a message

What if the workshop is too hot in summer?

Chiller is divided into industrial cold air mechanism cold and household chiller, industrial chiller is generally used in cold storage, cold chain logistics refrigeration environment, household chiller is also called water-cooled air conditioning, is a collection of cooling, ventilation, dust, odor, humidification in a evaporative cooling and ventilation unit. In addition to allowing enterprise workshops, public places, commercial and entertainment occasions to bring fresh air and reduce the temperature, there is also an important feature ---- energy saving and environmental protection.


Cooling principle of chiller:

When the fan runs into the chamber to produce negative pressure, so that the air outside the machine flows through the porous wet curtain surface forcing the dry bulb temperature of the air through the curtain to drop to close to the wet bulb temperature of the air outside the machine, that is, the dry bulb temperature at the outlet of the chiller is 5-12 ° C lower than the outdoor dry bulb temperature (up to 15 ° C in dry hot areas), the more dry and hot air, the greater the temperature difference, the better the cooling effect. Because the air is always introduced into the room from the outside, (this time called the positive pressure system), it can keep the fresh indoor air; At the same time, because the machine uses the principle of evaporation and cooling, it has the dual function of cooling and humidification (relative humidity can reach about 75%), which can be used in textile, knitting and other workshops, not only to improve the cooling and humidification conditions, but also to purify the air, reduce the rate of needle breakage in the knitting process, and improve the quality of needle textile products. The air cooler (evaporative air conditioner) is surrounded by a honeycomb wet curtain made of special materials, which has a large surface area and is continuously humidified by a water circulation system; High efficiency, low noise and energy saving fan is installed in the wet curtain chiller. When the fan is running, the negative pressure of the wet curtain chiller causes the air outside the machine to flow through the porous wet curtain into the machine. Due to the evaporation of water on the wet curtain, the air cooling through the wet curtain is forced to cool down. At the same time, because the water on the wet curtain evaporates to the air flowing through the wet curtain, the humidity of the air is increased, so the wet curtain cooler has the dual function of cooling and humidifying.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry